PUREWASH™ CIRRUS RO

The all new PUREWASH™ CIRRUS Simgle RO/DI System has been designed and engineered in house to be the absolute best in portable RO/DI Water Filtration/Purification whilst retaining exemplar user experience and quality!

Made from high quality stainless steel and other high quality components the CIRRUS was designed with the professional window cleaner in mind and is very robust, with very low running costs.

we offer a lifetime warranty on the frame 

The single Low Energy Reverse Osmosis Membrane is able to work without a unique design of water flow allows a pressurizing of the system to work at 50PSI+ (common tap pressure) without the need for a booster pump.

The CIRRUS System is best used for higher TDS water (110-200PPM) efficiently without burning through resin with high TDS water. The upfront cost is higher than a traditional DI System but the little running cost of $60 per annum( approximately) will save money starting the first day of use.

RO membranes will last 5+ years if looked after correctly. These membranes will bring water down to a very Low TDS (or 000ppm)where the DI System fitted inline is able to 'polish' the water off for  Pure' water on demand. In most cases a resin change (3L) is required every 3-6 months along with a CTO pre-filter.

Please note: RO membranes reject a waste water amount of approximately 1.5LPM during use. We recommend a short piece of hose is used to route this to a garden or drain during use.

The design incorporates a single RO Membrane in stainless steel housings tig welded to a full stainless trolley system, with a stainless steel pre-filter and DI housing also. This allows for quick and easy pre-filter, and DI Resin cartridge changes. The stainless housings used throughout are resistant to corrosion and will happily take a knock or two. 

Another unique feature of the System is the skinny housing design that slows down the velocity of water allowing greater RO Membrane longevity and Resin yield whilst still providing adequate flow for the user.

The removable handle and wheels make this System a mountable RO that turns the system from a portable to a static system. As a portable unit it can lay flat and fits snuggly in the back of most Utes, Vans, and Station Wagons.

The CIRRUS has proved itself in the field as a simple yet robust work horse that withstands a knock or two, outlasting the competition... at a fraction of the overseas cost!

This system works best with Higher TDS Levels.

The CIRRUS is hand made/assembled.We normally have made up stock awaiting order ready to be shipped but sometimes this machine is made to order so may take up to 3 working days to complete.

 Please call us to discuss timeframes if it's urgent.

Features:

• NZ Made
• Great for High TDS Areas
• Low Ongoing Costs
• Dual RO Membrane System
• Cartridge Filled Resin Chambers
• Stainless Steel Housings
• Plastic Metal Bearing Wheels (Rigid)
• Stainless Steel Push-Fittings
• Carbon/Sediment Pre-Filter
• Pressure Gauge
• Compact Trolley Design
• High Quality Parts Used
• Carries Approximately 4 Litres of Resin
• Spare Resin Cartridge. Never Run Out of Resin!
• Super Quick Resin Change
• All Replacement Parts in Stock
• Hand Made and Assembled